English
Language : 

MADL-0110_15 Datasheet, PDF (1/5 Pages) M/A-COM Technology Solutions, Inc. – Silicon PIN Limiter Diodes
MADL-0110 Series
Silicon PIN Limiter Diodes
V1
Features
• Low Insertion Loss and Noise Figure
• High Peak and Average Operating Power
• Various P1dB Compression Powers
• Low Flat Leakage Power
• Proven Reliable, Silicon Nitride Passivation
• RoHS Compliant
• 3 mil Anode Contact Area
Description
M/A-COM Technology Solutions manufactures a series
of silicon PIN limiter diodes with small and medium
I-region lengths which are specifically designed for high
signal applications. The devices are designed to provide
low insertion loss, at zero bias, as well as low flat
leakage power with fast signal response/recovery times.
Applications
The MADL-0110 Series of PIN limiter diodes are
designed for use in passive limiter control circuits to
protect sensitive receiver components such as low noise
amplifiers (LNA), detectors, and mixers covering the 10
MHz to 18 GHz frequency range.
Absolute Maximum Ratings1 TAMB = 25°C
(Unless otherwise specified)
Parameter
Absolute Maximum
Forward Current
100mA
Operating Temperature
-55°C to +125°C
Storage Temperature
-55°C to +150°C
Junction Temperature
+175°C
RF Peak & C.W. Incident Power Per Performance Table
Mounting Temperature
+320°C for 10 sec.
Note:
1. Exceeding any of the above ratings may cause
permanent damage.
Chip Outline
A Square
Anode
B
C
Full Area Cathode
ODS
134
Dimension
A
B
C
mils
15 ± 2
3
7 ±1*
mm
.381 ± .51
0.076
.178 ± .025
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.