MADL-011012 Datasheet, PDF (1/6 Pages) M/A-COM Technology Solutions, Inc. – 360 W CW Power Limiter

MADL-011012
360 W CW Power Limiter
0.3 - 1.0 GHz
Features
 55.6 dBm CW Power Handling @ +25°C
 54 dBm CW Power Handling @ +85°C
 0.2 dB Insertion Loss (400 - 500 MHz)
 25 dB Return Loss (400 - 500 MHz)
 21 dBm Flat Leakage Power
 Lead-Free 10.1 x 6.2 x 3.2 mm³ Package
 RoHS* Compliant
 Hermetic Seal¹
Description
The MADL-011012 is a lead-free surface mount,
high power limiter which integrates the equivalent of
20 PIN, Schottky, limiter diodes, capacitors,
inductors, and resistors in a compact ceramic
package. This device provides superior low and high
signal performance from 0.3 - 1.0 GHz without DC
bias.
The MADL-011012 is ideally suitable for higher peak
and CW power receiver-protector microwave circuits
applications where higher performance surface
mount limiter assemblies are required.
Ordering Information
Part Number
Package
MADL-011012-001
bulk
MADL-011012-001SMB
Sample Test Board
1. Hermetic Seal provides fine leak rate < 5x10^-8 atm·cc/s.
Functional Schematic
Rev. V1
RF_IN
1
2
RF_OUT
3 _GND
Top view
Pin Configuration
Pin No.
Pin Name
Description
1
RF_IN
RF Input
2
RF_OUT
RF Output
3
Paddle²
Ground
2. The exposed paddle centered on the package bottom must
be connected to RF, DC, and thermal ground.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support