MADA2030G_15 Datasheet, PDF (1/5 Pages) M/A-COM Technology Solutions, Inc. – 5-Bit GaAs Digital Attenuator

MADA2030G
5-Bit GaAs Digital Attenuator
DC- 2.0 GHz
Features
 Attenuation 0.5-dB Steps to 15.5 dB
 Temperature Stability: ± 0.1 dB from –55°C to
+85°C Typical
 Fast Switching Speed: 3 nS Typical to 90%
 Ultra Low DC Power Consumption
Description
M/A-COM’s MADA2030G is a 5-bit, 0.5-dB step
GaAs MMIC digital attenuator. The MADA2030G is
ideally suited for use where high accuracy, fast
switching, very low power consumption and low
intermodulation products are required at a low cost.
Typical applications include radio and cellular
equipment, wireless LANS, GPS equipment and
other gain/level control circuits.
The MADA2030G is fabricated with a monolithic
GaAs MMIC using a mature 1-micron process. The
process features full chip passivation for increased
performance and reliability.
Ordering Information
Part Number
MADA2030G
Package
DIE
Absolute Maximum Ratings ^1,2
Parameter
Input Power
500 MHz - 2 GHz
Control Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
+34 dBm
-8.5 VDC
+175°C
-65°C to +175°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
Rev. V3
Die
Bond Pad Dimensions
Bond Pad
RF_IN, RF_OUT
VC1, VC2, VC3,
VC3, VC4, VC4
VC5, VC5
GND1, GND2,
GND3
GND4
DIE Size
Dimension Inches (mm)
0.004 x 0.008 (0.100 x 0.200)
0.004 x 0.004 (0.100 x 0.100)
0.008 x 0.004 (0.200 x 0.100)
0.004 x 0.004 (0.100 x 0.100)
0.045 x 0.039 x 0.010 (1.14 x 0.99 x 0.25)
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support