MACS-007800-0M1R00 Datasheet, PDF (1/2 Pages) Tyco Electronics – 24.125GHz Local Oscillator

MACS-007800-0M1R00
Local Oscillator
24.125 GHz
Rev. V3
Features
• Low Cost
• Compact Size
• Gold Plated Solder Pins
• Rugged Die cast Construction
• RoHS* Compliant
Description and Applications
M/A-COM’s MACS-007800-0M1R00 is a RoHS
Compliant K-Band Local Oscillator consisting of a
Gunn Diode oscillator assembled into a die cast
waveguide package.
These Local Oscillators are well suited for high vol-
ume applications where small size and reliability are
required. This local oscillator is an inexpensive low
power transmitter suitable for use in CW Doppler
radar systems. Typical applications include, Speed
radars, traffic control, and industrial process control.
Product Specifications
Parameter
Test
Conditions
Units
Min.
Typ. Max.
Operating
Frequency
+25 ºC
GHz 24.12 24.150 24.17
Output Power +25 ºC
mW
8.0
Operating
Current
Operating
Voltage
+25 ºC
+25 ºC
mA
VDC
175 250
5.0
Operating temperature to full specifications -30°C to +70°C
Absolute Maximum Ratings ¹
Parameter
Maximum Ratings
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
Incident RF Input Power
+20 dBm
DC Input (Gunn Diode)
+5.5VDC
Soldering Temperature
+260 °C max.
1. Exceeding these limits may cause permanent damage.
Note: Device is ESD Sensitive.
Proper ESD Precautions should be
used when handing this Device..
Package Outline
PIN Configuration
Pin
1
2
Function
DC Input
GND
Functional Block Diagram
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.