MACPES0026_15 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – E-Series 2-Way Power Divider

E-Series 2-Way 0^o Power Divider
5-1000 MHz
Features
Features
• 2 Way
• 0 Degree
• Surface Mount
• Available on Tape and Reel. Reel quantity 900
Description
M/A-COM’s MACPES0026 is a 2 Way 0^o Power
Divider in a low cost, surface mount package. Ideally
suited for high volume cellular and wireless and
CATV applications. An external 160 Ohm chip resis-
tor is required with this part.
Case Style:
MACPES0026
V2
Pin Configuration
Pin No.
2,5
-
1
-
6
4
3
Function
Not Connected
External 50Ohms
Ground
Case Grouns
Input
Port 1
Port 2
Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010
Absolute Maximum Ratings ^1,2
Parameter
Max Power Rating
Internal Load Dissipation
Absolute Maximum
1 Watt
0.125 Watt
Pin Temp (10 sec)
260°C
Storage Temp.
-55°C to 100°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
Ordering Information
Part Number
MACPES0026TR
Package
900 piece reel
Note: Reference Application Note M513 for reel size information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: [phone] • Europe Tel: [phone]
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.