MAAM-010239_15 Datasheet, PDF (1/5 Pages) M/A-COM Technology Solutions, Inc. – Low Noise FTTx Amplifier

MAAM-010239
Low Noise FTTx Amplifier
50 - 1000 MHz
Features
 Low Distortion
 Low Noise Figure
 Lead-Free 4 mm 20-Lead PQFN Package
 Halogen-Free “Green” Mold Compound
 260°C Reflow Compatible
Description
The MAAM-010239 is a GaAs pHEMT MMIC
amplifier in a lead-free 4mm 20-lead PQFN
package. The amplifier is designed to meet the high
gain, high linearity and low noise requirements of
FTTx receivers.
Rev. V1
Functional Schematic
RF_IN N/C N/C N/C N/C
N/C
20
1
N/C
OUT_
15 _STG1
N/C
N/C
N/C
N/C
RF_OUT 5
N/C
IN_
11 _STG2
Ordering Information ^1,2
Part Number
Package
MAAM-010239-TR1000
1000 piece reel
MAAM-010239-TR3000
3000 piece reel
MAAM-010239-001SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
Absolute Maximum Ratings ^3,4,5
Parameter
Max Input Power
Absolute Maximum
-5 dBm
Operating Voltage
+10.0 V
Operating Temperature
Junction Temperature ⁶
-20°C to +85°C
+150°C
Storage Temperature
-65°C to +150°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
5. These operating conditions will ensure MTTF > 1 x 10⁶ hours.
6. Junction Temperature (T_J) = T_A + Ó¨jc * (V * I)
Typical thermal resistance (Өjc) = 51 °C/W.
a) For T_A = 25°C,
T_J = 80 °C @ 5.0 V, 215 mA
b) For T_A = 85°C,
T_J = 140 °C @ 5.0 V, 215 mA
N/C N/C N/C N/C N/C
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Pin Name
N/C
N/C
N/C
N/C
RF_OUT
N/C
N/C
N/C
N/C
N/C
IN_STG2
N/C
N/C
N/C
OUT_STG1
N/C
N/C
N/C
N/C
RF_IN
Paddle ⁷
Description
No Connection
No Connection
No Connection
No Connection
RF Output
No Connection
No Connection
No Connection
No Connection
No Connection
STAGE 2 RF Input
No Connection
No Connection
No Connection
STAGE 1 RF Output
No Connection
No Connection
No Connection
No Connection
RF Input
RF and DC Ground
7. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support