MAAL-007673 Datasheet, PDF (1/4 Pages) Tyco Electronics – Low Noise Amplifier 1.7 - 2.0 GHz

MAAL-007673
Low Noise Amplifier
1.7 - 2.0 GHz
Features
• Low Noise Figure: 1.65 dB
• High Gain: 20 dB
• Low Power Consumption: 3 to 5 V, 8 mA
• High Dynamic Range
• DC Decoupled RF Input and Output
• No External RF Tuning Elements Necessary
• Lead-Free Low Cost SOIC-8 Plastic Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of MAAM12031
Functional Schematic
GND
VDD
RF OUT
GND
8
7
6
5
Rev. V2
Description
M/A-COM’s MAAL-007673 is a high performance
GaAs MMIC low noise amplifier in a lead-free SOIC
8-lead surface mount package. The MAAL-007673
employs a fully monolithic design which eliminates
the need for external tuning networks. It can be
biased using 3 or 5 volt supplies and has an option
for biasing at higher currents for increased dynamic
range.
The MAAL-007673 is ideally suited for use where
low noise figure, high gain, high dynamic range and
low power consumption are required. Typical
applications include receiver front ends in the
Japanese Personal Handy Phone Service (PHS),
Private Branch Exchange (PBX) and Personal
Communications and Networks (PCS, PCN)
markets, as well as standard gain blocks, buffer
amps, driver amps and IF amps in both fixed and
portable systems.
M/A-COM’s MAAL-007673 is fabricated using a
mature 0.5-micron gate length GaAs process. The
process features full passivation for increased
performance reliability.
Ordering Information¹
Part Number
Package
MAAL-007673-000000
Bulk Packaging
MAAL-007673-TR1000
1000 piece reel
MAAL-007673-TR3000
3000 piece reel
1. Reference Application Note M513 for reel size information.
1
2
GND
R1
(optional)
3
RF IN
4
GND
Pin Configuration
Pin No. Function
1
Ground
2
R1 (Optional)
3
RF Input
4
Ground
Pin No.
5
6
7
8
Function
Ground
RF Output
V_DD
Ground
Absolute Maximum Ratings ^2,3
Parameter
Absolute Maximum
V_DD
Input Power
Current ⁴
Channel Temperature ⁵
Operating Temperature
Storage Temperature
+10 VDC
+17 dBm
30 mA
+150°C
-40°C to +85°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. Only if pin 2 is used to increase current (see note 9).
5. Typical thermal resistance (θjc) = +165°C/W.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.