MAADSS0008 Datasheet, PDF (1/3 Pages) Tyco Electronics – Digital Attenuator 15 dB, 1-Bit, TTL Driver, DC-2.0 GHz

MAADSS0008
Digital Attenuator, 1-Bit, 15 dB
DC - 2.0 GHz
Features
• Single 15-dB Step
• Low Loss, 0.3 dB Typical @ 900 MHz
• 2.5 to 5.0 Volt Operation
• Tape and Reel Packaging Available
• Lead-Free SOT-25 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of AT-267
Description
M/A-COM’s MAADSS0008 is a 1-bit, 15-dB step
GaAs MMIC digital attenuator in a lead-free SOT-25,
5 lead surface mount plastic package. The
MAADSS0008 is ideally suited for use where high
accuracy, very low power consumption and low
intermodulation products are required.
Typical applications include wireless handsets, base
stations, wireless LAN equipment, GPS receivers
and any RF applications with automatic gain/level
control circuits.
The MAADSS0008 is fabricated as a monolithic
GaAs integrated circuit using a mature PHEMT
process. The process features full chip passivation
for performance and reliability.
Ordering Information ¹
Part Number
Package
MAADSS0008TR
1000 piece reel
MAADSS0008TR-3000
3000 piece reel
MAADSS0008SMB
Sample Board
1. Reference Application Note M513 for reel size information.
Functional Schematic
5
Rev. V1
4
1
2
3
Pin Configuration
Pin No.
1
2
3
Function
RF Input Port
Ground
RF Output Port
Pin No.
4
5
Function
V1
V2
Absolute Maximum Ratings ^2,3
Parameter
Absolute Maximum
Input Power
+21 dBm
Control Voltage
Operating Temperature
⏐V_C⏐ ≤ 8V
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.