MA4EX600H-1225T Datasheet, PDF (1/2 Pages) Tyco Electronics – Silicon MMIC Double Balanced HMIC Mixer 4200 - 6000 MHz

MA4EX600H-1225T
Silicon Double Balanced HMIC Mixer
4200 – 6000 MHz
Rev. V1
Features
ƒ 5.8 dB Typical Conversion Loss at 5000 MHz
ƒ +13 to +17 dBm LO Drive
ƒ HMIC IC Process
ƒ Silicon High Barrier Schottky Barrier Diodes
ƒ DC – 2000 Mhz IF Bandwidth
ƒ Low Cost Miniature Plastic Package
Description
M/A-COM's MA4EX600H-1225 is a silicon monolithic
4.2 – 6.0 GHz double balanced mixer in a low cost
miniature surface mount SOT 25 package. The die uses
M/A-COM’s unique HMIC silicon/glass process to
realize low loss passive elements while retaining the
advantages of high barrier silicon Schottky barrier diodes.
Applications
These mixers are well suited for high volume WLL and
WLAN applications where small size and repeatability
are required. Typical applications include frequency
conversion, modulation, and demodulation in wireless
receivers and transmitters.
Package Outline ( Topview )
32
1
4
PIN CONFIGURATION
PIN
Function
1
RF
2
Gnd
3
LO
Ordering Information
Model No.
MA4EX600H-1225T
5
PIN
Function
4
Gnd
5
IF
Package
Tape and Reel
Electrical Specifications @ +25°C
Parameter
Conversion Loss
L - R Isolation
L - I Isolation
R - I Isolation
RF VSWR
IF VSWR
Input IP3
Input 1 dB
Compression Power
IF 1 dB Bandwidth
Frequency Range
5000 MHz
4.2 - 6.0 GHz
5000 MHz
4.2 - 6.0 GHz
5000 MHz
4.2 – 6.0 GHz
5000 MHz
4.2 - 6.0 GHz
5000 MHz
4.2 - 6.0 GHz
1000 MHz
50 - 2000 MHz
5000 MHz
4.2 - 6.0 GHz
5000 MHz
4.2 - 6.0 GHz
DC - 2000 MHz
Test Conditions
LO Drive = +15 dBm
RF = -10 dBm, IF = 60 MHz
LO Drive = +15 dBm
RF Level = - 10 dBm
LO Drive = +15 dBm
RF Level = - 10 dBm
LO Drive = +15 dBm
RF Level = - 10 dBm
LO Drive = +15 dBm
RF Level = - 10 dBm
LO Drive = +15 dBm
IF Level = - 10 dBm
LO Drive = +15 dBm
RF = -10 dBm, IF = 60 MHz
LO Drive = +15 dBm
RF = -10 dBm, IF = 60 MHz
LO = 5000 MHz @+15dBm
Units
dB
dB
dB
dB
Ratio
Ratio
dBm
dBm
MHz
Min.
Typ.
5.8
6.5
28
25
26
24
13
13
1.25
1.9
1.9
1.8
16.7
16.0
6.9
8.0
0-
2000
Max.
6.5
8.0
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology
Solutions is considering for development. Performance is based on target specifications,
simulated results, and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications
are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be
available. Commitment to produce in volume is not guaranteed.
• North America Tel: [phone] • Europe Tel: [phone]
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.