MA4EX580L-1225T Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Silicon Double Balanced HMIC Mixer

MA4EX580L-1225T
Silicon Double Balanced HMIC Mixer
4.7 - 6.0 GHz
Features
• 7.6 dB Typical Conversion Loss
• +3 to +7 dBm LO Drive
• HMIC™ Patented Process
• Silicon Low Barrier Schottky Diodes
• DC - 1050 MHz IF Bandwidth
• Low Cost Miniature Plastic Package
Package Outline
(Topview)
M/A-COM Products
Rev. V1
3 21
Description and Applications
M/A-COM’s MA4EX580L-1225T is a silicon mono-
lithic 4.7 to 6.0 GHz double balanced mixer in a low
cost miniature surface mount SOT-25 package. The
die uses M/A-COM’s unique HMIC^TM silicon/glass
process to achieve low loss passive elements while
retaining the advantages of low barrier silicon
Schottky diodes.
These mixers are well suited for high volume
wireless and cellular applications where small size
and repeatability are required. Typical applications
include frequency conversion, modulation, and
demodulation in wireless receivers and transmitters.
Ordering Information
Standard Part Number
MA4EX580L-1225T
Package
Tape and Reel
Absolute Maximum Ratings¹
Parameter
Operating Temperature
Maximum Ratings
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
Incident LO Power
+20 dBm
Incident RF Power
+20 dBm
4
5
PIN Configuration
PIN
Function
PIN
1
RF
4
2
GND
5
3
LO
Schematic
IF
RF
Function
GND
IF
LO
1. Exceeding these limits may cause permanent damage.
2. Refer to application note M538 for surface mounting
instructions.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.