MA4EX240L1-1225T Datasheet, PDF (1/3 Pages) Tyco Electronics – Silicon Double Balanced HMIC Mixer 1700 - 2500 MHz

MA4EX240L1-1225T
Silicon Double Balanced HMIC Mixer
1700 - 2500 MHz
Features
• Low Cost Miniature Plastic Package
• 6.4 dB Typical Conversion Loss at 2100 MHz
• 7.4 dB Typical Conversion Loss at 2400 MHz
• +3 to +7 dBm LO Drive
• HMIC™ Patented Process
• Silicon Low Barrier Schottky Diodes
• DC - 400 MHz IF Bandwidth
• RoHS* Compliant with 260 °C. Reflow Capability
• 100% MATTE Tin Plating
Description and Applications
M/A-COM’s MA4EX240L1-1225T is a silicon mono-
lithic 1700-2500 MHz double balanced mixer in a
low cost miniature surface mount SOT-25 package.
The die uses M/A-COM’s unique HMIC^TM silicon/
glass process to achieve low loss passive elements
while retaining the advantages of low barrier silicon
Schottky diodes.
These mixers are well suited for high volume
wireless and cellular applications where small size
and repeatability are required. Typical applications
include frequency conversion, modulation, and
demodulation for receivers and transmitters in both
portable cellular and base station applications.
Ordering Information
Standard Part Number
MA4EX240L1-1225T
Package
Tape and Reel
Absolute Maximum Ratings¹
Parameter
Operating Temperature
Maximum Ratings
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
Incident LO Power
+20 dBm
Incident RF Power
+20 dBm
Solder Temperature
+260 Deg C.
1. Exceeding these limits may cause permanent damage.
Package Outline
(Topview)
3 21
Rev. V2
4
5
PIN Configuration
PIN
Function
PIN
1
GND
4
2
GND
5
3
IF
Function
RF
LO
Schematic
IF
RF
LO
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.