English
Language : 

MA4EX240L-1225T Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Silicon Double Balanced HMIC Mixer 1700 - 2500 MHz
MA4EX240L-1225T
Silicon Double Balanced HMIC Mixer
1700 - 2500 MHz
Features
• Low Cost Miniature Plastic Package
• 6.4 dB Typical Conversion Loss at 2100 MHz
• 7.4 dB Typical Conversion Loss at 2400 MHz
• +3 to +7 dBm LO Drive
• HMIC™ Patented Process
• Silicon Low Barrier Schottky Diodes
• DC - 400 MHz IF Bandwidth
Description and Applications
M/A-COM’s MA4EX240L1-1225T is a silicon mono-
lithic 1700-2500 MHz double balanced mixer in a
low cost miniature surface mount SOT-25 package.
The die uses M/A-COM’s unique HMICTM silicon/
glass process to achieve low loss passive elements
while retaining the advantages of low barrier silicon
Schottky diodes.
These mixers are well suited for high volume
wireless and cellular applications where small size
and repeatability are required. Typical applications
include frequency conversion, modulation, and
demodulation for receivers and transmitters in both
portable cellular and base station applications.
Ordering Information
Standard Part Number
MA4EX240L-1225T
Package
Tape and Reel
Absolute Maximum Ratings1
Parameter
Maximum Ratings
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
Incident LO Power
+20 dBm
Incident RF Power
+20 dBm
1. Exceeding these limits may cause permanent damage.
Package Outline
(Topview)
M/A-COM Products
Rev. V2
3 21
4
5
PIN Configuration
PIN
Function
PIN
1
GND
4
2
GND
5
3
IF
Function
RF
LO
Schematic
IF
RF
LO
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
• North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or
information contained herein without notice.