MA4EX190H-1225T Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Silicon Double Balanced HMICTM Mixer 1700 - 2300 MHz

MA4EX190H-1225T
Silicon Double Balanced HMIC^TM Mixer
1700 - 2300 MHz
Features
• Low Cost Miniature Plastic Package
• High IP3 : 28 dbm Typical
• 6.6 dB Typical Conversion Loss at 1900 MHz
• 7.5 dB Typical Conversion Loss at 2200 MHz
• +13 to +17 dBm LO Drive
• HMIC™ Patented Process
• Silicon High Barrier Schottky Diodes
• DC - 500 MHz IF Bandwidth
• Lead Free ( RoHS Compliant ) Equivalent Available
With 260 Deg.C. Reflow Capability
Description and Applications
M/A-COM’s MA4EX190H-1225T is a silicon
monolithic 1700-2300 MHz double balanced mixer in
a low cost miniature surface mount SOT-25
package. The die uses M/A-COM’s unique HMIC^TM
silicon/glass process to achieve low loss passive
elements while retaining the advantages of high
barrier silicon Schottky diodes.
This part is offered with Sn/Pb plating, as well as
with 100 % matte Sn plating on the RoHS compliant
part number.
These mixers are well suited for high volume
wireless and cellular applications where small size
and repeatability are required. Typical applications
include frequency conversion, modulation, and
demodulation for receivers and transmitters in both
portable cellular and base station applications.
Absolute Maximum Ratings¹
Parameter
Maximum Ratings
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
Incident LO Power
+20 dBm
Incident RF Power
+20 dBm
Soldering Temperature
(Standard Part Number)
Solder Temperature
(RoHS Compliant Part Number)
+235 Deg C.
+260 Deg C.
1. Exceeding these limits may cause permanent damage.
Package Outline
(Topview)
3
2
1
Rev. V2
4
5
PIN Configuration
PIN
Function
PIN
1
RF
4
2
GND
5
3
LO
Functional Schematic
IF
RF
Function
GND
IF
LO
Ordering Information
Standard Part
Number
MA4EX190H-1225T
RoHS Compliant
Part Number
Package
MA4EX190H1-1225T Tape and Reel
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.