English
Language : 

MA47200 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Stripline PIN Diode Switch Modules
MA47200 Series
Stripline PIN Diode Switch Modules
V5
Features
♦ Broadband 50 Ohm Design Through X Band
♦ High Power Handling
♦ Voltage Ratings to 1000V
♦ Fast Switching Speeds
♦ Hermetically Sealed Package
♦ RoHS Compliant
Description
These M/A-Com Technology Solutions switch modules
consist of a shunt mounted, passivated, PIN diode chip
in a hermetically sealed strip-line package. These
modules are optimized for use in a 50 ohm micro-strip
or strip-line circuit. By incorporating the appropriate
series inductance to produce a matched low pass filter
structure in a zero or reverse bias condition, no external
matching is required. To achieve high isolation, a
forward bias current between +10mA to +100mA is
applied to the center conductor which changes the
module’s inductive impedance from a high to a low-
impedance state causing the RF power to be reflected.
Absolute Maximum Rating1 @ TA = +25°C
(unless otherwise specified)
Parameter
Rating
Voltage
Voltage rating per pg. 2 table
Operating Temperature
- 65°C to +150°C
Storage Temperature
-65°C to +175°C
Power Dissipation
PDISS = 150°C -TAMBIENT
Thermal Resistance
1. Operation of the device above any one of these parameters
may cause permanent damage.
Available Stripline Packages
Applications
The M/A-COM Technology Solutions MA47200 series
modules maybe operated as a SPST reflective switch
or as an attenuator by applying the appropriate forward
or reverse DC bias. These broadband modules are
designed to operate at frequencies from VHF through X
Band. A variety of modules are available which offer a
choice of breakdown voltages and switching speeds.
ODS-144
ODS-114
Internal Wiring Diagram
Specifications subject to change without prior notification.
1
ADVANCED: Data Sheets contain information regarding a product MA-COM Technical Solutions is • North America Tel: 800.366.2266 / Fax: 978.366.2266
considering for development. Performance is based on target specifications, simulated results, and/
or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product MA-COM Technical Solutions
has under development. Performance is based on engineering tests. Specifications are typical.
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
MA-COM Technical Solutions and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice.