MA47120 Datasheet, PDF (1/6 Pages) M/A-COM Technology Solutions, Inc. – Multi Purpose Axial Leaded Glass PIN Diodes

Axial Leaded Glass PIN Diodes
Multi Purpose Axial Leaded Glass PIN Diodes
RoHs Compliant
Rev. V6
Features
♦ Glass Hermetically Sealed Packages
♦ Large Signal Switch Design
♦ Available in Low Capacitance
♦ Passivated Chip for Low Leakage Current
♦ Tape and Reel Packaging Available
♦ Fully RoHS Compliant
♦ MIL-STD 19500 Screening Available
Description
M/A-COM’s series of low and medium power glass
PIN diodes are specifically designed for use in
switches, duplexers, electrically tuned digital filters
AGC attenuators, TR switches and RF modulators.
They preform particularly well in distortion sensitive
environments from HF through S-Band. These
hermetically sealed axial leaded PIN diodes are
designed for use in the harshest commercial and
military applications where their inherent ruggedness
makes them an ideal choice. They may ordered
screened to meet MIL-STD 19500 requirements.
Glass Package Styles
ODS 4, 54 , 139, 146
PIN Chip
Glass Cylinder
Tin Plated Dumet Leads
Absolute Maximum Ratings
T_AMB = +25°C (Unless Otherwise Noted) ¹
Parameter
Absolute Maximum
D.C. Reverse Voltage
(See Tables)
Operating Temperature
-55°C to +175°C
Storage Temperature
-55°C to +200°C
Installation Temperature +280°C for 10 Seconds
Power Dissipation Listed Below Will De-Rate
Linearly to 0mW at 175˚C
Case Style 54
250mW without heatsink
@ +25°C
Case Style 139
500mW without heatsink
@ +25°C
Case Style 4 & 146
1000mW without heatsink
@ +25°C
Notes
1. Operation of this device above any one of these
parameters may cause permanent damage.
Design Recommendations
The axial leaded, glass, PIN diode series is available
in four glass package styles. The ODS 54 is the
most suitable to meet low power, low capacitance
requirements for high isolation in a series connected
switch at VHF frequencies. The ODS 4, 139 and 146
are most suited for moderate power applications
requiring low package inductance.
M/A-COM’s silicon PIN diode chips are also
available in a wide variety of alternative package
styles besides glass. For case style options,
availability and electrical specifications, please
refer to the “Packaged PIN Diode Datasheet”
located on the M/A-COM website at :
www.macom.com/DataSheets/packagedpindiodes.pdf
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.