MA46H120_V3 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – GaAs Constant Gamma Flip-Chip

MA46H120 Series
GaAs Constant Gamma Flip-Chip
Varactor Diode
Features
• Constant Gamma for Linear Tuning
• Low Parasitic Capacitance
• High Q
• Silicon Nitride Passivation
• Polyimide Scratch Protection
• Surface Mount Configuration
Description
M/A-COM Technology Solutions’
MA46H120 series is a gallium arsenide flip
chip hyperabrupt varactor diode. These
devices are fabricated on OMCVD epitaxial
wafers using a process designed for high
device uniformity and extremely low
parasitics. The MA46H120 diodes are fully
passivated with silicon nitride and have an
additional layer of polyimide for scratch
protection. The protective coatings prevent
damage to the junction during automated or
manual handling. The flip chip configuration
is suitable for pick and place insertion.
Absolute Maximum Ratings ^1,2
Rev. V3
Operating Temperature
-40°C to +125°C
Storage Temperature
-65°C to +150°C
Power Dissipation
100 mW
Mounting Temperature +235°C for 10 seconds
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
Chip Layout
Front View (Circuit Side)
Back View (Operator Side)
Ordering Information
Part Number
MA46H120-W
MA46H120
MAVR-000120-12030W
Package
Whole Wafer
Gel Pack
Waffle Pack
Electrical Specifications @ T_A = +25 °C
Breakdown Voltage @ IR = 10μA, Vb = 20 V Minimum
Reverse Leakage Current @ VR =14V, IR = 100 nA Maximum
Schematic
* Specifications are subject to change without prior notification
1
ADVANCED: Data Sheets contain information regarding a product MA-COM Technical Solutions is • North America Tel: [phone] / Fax: [phone]
considering for development. Performance is based on target specifications, simulated results, and/
or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product MA-COM Technical Solutions
has under development. Performance is based on engineering tests. Specifications are typical.
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commit- _{MA-COM Technical Solutions and its affiliates reserve the right to make changes to the}
ment to produce in volume is not guaranteed.
product(s) or information contained herein without notice.