M9BC_15 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Double-Balanced Mixer

M9BC
Double-Balanced Mixer
Features
• LO & RF: 0.5 TO 500 MHz
• IF: DC TO 500 MHz
• LO DRIVE: +17 dBm (NOMINAL)
• HIGH INTERCEPT: +25 dB (TYP.)
• HIGH ISOLATION: 50 dB (TYP.)
Product Image
Description
The M9BC is a double balanced mixer, designed for use in military,
commercial, and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband ferrite baluns to attain
excellent performance. This mixer can also be used as a phase
detector and/or bi-phase modulator since the IF port is DC coupled to the
diodes. Environmental screening is available to MIL-STD-883,
MIL-STD-202, or MIL-DTL-28837, consult factory.
Rev. V2
Ordering Information
Part Number
Package
M9BC
Relay Can
Electrical Specifications: Z₀ = 50Ω Lo = +17 dBm (Downconverter Application only)
Parameter
Test Conditions
Typical
Units
25ºC
Guaranteed
0º to 50ºC -54º to +85ºC
fR=0.0005 to 0.03 GHz, fL=0.0005 to 0.03 GHz, fI=0.0004 to
0.03GHz
dB
6.0
7.0
7.3
SSB Conversion Loss &
fR=0.03 to 0.1 GHz, fL=0.03 to 0.1 GHz, fI=0.0004 to
SSB Noise Figure (max)
0.1GHz
dB
7.0
7.5
7.8
fR=0.1 to 0.5 GHz, fL=0.1 to 0.5 GHz, fI=0.0004 to 0.5GHz dB
8.0
9.0
9.3
Isolation, L to R (min)
Isolation, L to I (min)
Isolation, R to I (min)
1 dB Conversion
Compression
Input IP3
fL = 0.0005 to 0.03 GHz
fL = 0.03 to 0.1 GHz
fL = 0.1 to 0.5 GHz
fL = 0.0005 to 0.03 GHz
fL = 0.03 to 0.1 GHz
fL = 0.1 to 0.5 GHz
fL = 0.0005 to 0.5 GHz
fL @ +17 dBm
dB
60
55
54
dB
55
45
44
dB
40
35
34
dB
55
45
44
dB
45
35
34
dB
30
25
24
dB
20
dBm
+8
dBm
+23
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.