M8THC Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – LOAD INSENSITIVE MIXER

M8TH / M8THC
Load Insensitive Mixer
Features
• LO 1 TO 3400 MHz
• RF 1 TO 3400 MHz
• IF 1 TO 2000 MHz
• LO DRIVE: +23 dBm (NOMINAL)
• INSENSITIVE TO SYSTEM MISMATCH
• HIGH INTERCEPT: +29 dBm (TYP.)
Description
The M8TH is a termination insensitive mixer, designed for use in
military, wireless and test equipment applications. The design
utilizes Schottky bridge quad diodes, broadband ferrite baluns and
internal loads to provide excellent performance without
degradation due to external VSWR mismatches. Environmental
screening available to MIL-STD-883, MIL-STD-202 or
MIL-DTL-28837, consult factory.
Product Image
Rev. V5
Ordering Information
Part Number
M8TH
M8THC
Package
TO-8
SMA Connectorized
Electrical Specifications: Z₀ = 50Ω Lo =+23 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC
-54º to +85ºC*
SSB Conversion Loss
(max) & SSB Noise
Figure (max)
fR = 0.005 to 2 GHz, fL = 0.005 to 2 GHz, fI = 0.001 to 0.5 GHz
fR = 0.001 to 3.4 GHz, fL = 0.001 to 3.4 GHz, fI = 0.001 to 2 GHz
dB
dB
6.5
8.5
8.0
10.5
8.3
10.8
Isolation, L to R (min)
Isolation, L to I (min)
Isolation, R to I (min)
fL = 0.01 to 1.5 GHz
fL = 0.01 to 3.4 GHz
fL = 0.01 to 1.5 GHz
fL = 0.01 to 3.4 GHz
fR = 0.01 to 3.4 GHz
dB
37
30
29
dB
35
22
21
dB
40
30
29
dB
35
25
24
dB
21
1 dB Conversion Comp.
fL = +23 dBm
dBm
+17
Input IP3
fR1 = 1 GHz at 0 dBm, fR2 = 1.01 GHz at 0 dBm,
fL = 1.8 GHz at +22 dBm
dBm
+29
* The M8TC specification limits apply at 0ºC to +50ºC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.