M8HC-7 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Load Insensitive Mixer

M8H-7 / M8HC-7
Load Insensitive Mixer
Features
• LO 2 TO 6 GHz
• RF 2.4 TO 6 GHz
• IF 0 TO 2000 MHz
• LO DRIVE +7 dBm (nominal)
• HIGH ISOLATION 40 dB (TYP.)
Description
The M8H-7 is a double balanced mixer, designed for use in
military, commercial and test equipment applications. The design
utilizes Schottky ring quad diodes and broadband soft dielectric
and ferrite baluns to attain excellent performance. This mixer can
also be used as a phase detector and/or bi-phase modulator since
the IF port is DC coupled to the diodes. The use of high
temperature solder and welded assembly processes used
internally makes it ideal for use in manual, semi-automated
assembly. Environmental screening available to MIL-STD-883,
MIL-STD-202, or MIL-DTL-28837, consult factory.
Ordering Information
Product Image
Rev. V2
Part Number
M8H-7
M8HC-7
Package
TO-8
SMA Connectorized
Electrical Specifications: Z₀ = 50Ω Lo = +7 dBm (Downconverter Application only)
Parameter
Test Conditions
Units
Typical
25ºC
Guaranteed
0º to 50ºC -54º to +85ºC
SSB Conversion Loss & fR=3.7 to 4.2 GHz, fL=2 to 6 GHz, fI=0.03 to 2 GHz
dB
5.0
7.0
7.5
SSB Noise Figure (max)
fR=2.4 to 6 GHz, fL=2 to 6 GHz, fI=0.03 to 2 GHz
dB
7.0
9.0
9.5
Isolation, L to R (min)
fL = 2 to 4 GHz
fL = 4 to 6 GHz
dB
42
32
30
dB
37
25
23
Isolation, L to I (min)
1 dB Conversion
Compression
Input IP3
fL = 2 to 6 GHz
fL @ +7 dBm
dB
21
16
14
dBm
+0
dBm
+13
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.