M80 Datasheet, PDF (1/3 Pages) Tyco Electronics – Double-Balanced Mixer

M80 / M80C
Double-Balanced Mixer
Features
• LO 4 TO 18 GHz
• RF 6 TO 18 GHz
• IF DC TO 3000 MHz
• LO DRIVE +7 dBm (nominal)
• WIDE BANDWIDTH
• LOW NOISE FIGURE
Description
The M80 is a double balanced mixer, designed for use in military,
commercial and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband soft dielectric and
ferrite baluns to attain excellent performance. This mixer can also
be used as a phase detector and/or bi-phase modulator since the
IF port is DC coupled to the diodes. The use of high temperature
solder and welded assembly processes used internally makes it
ideal for use in manual, semi-automated assembly. Environmental
screening available to MIL-STD-883, MIL-STD-202, or
Ordering Information
Part Number
M80
M80C
Package
Minpac
SMA Connectorized
Electrical Specifications: Z₀ = 50Ω Lo =
Parameter
Test Conditions
Product Image
Rev. V2
+7 dBm (Downconverter
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss
(max) & SSB Noise
Figure (max)
fR = 6 to 16 GHz, fL = 5 to 17 GHz, fI = 30 to 1000 MHz
fR = 6 to 18 GHz, fL = 4 to 18 GHz, fI = 1000 to 3000 MHz
dB
dB
6.0
7.0
8.0
9.0
8.5
9.5
Isolation, L to R (min)
Isolation, L to I (min)
1 dB Conversion Comp.
fL = 4 to 14 GHz
fL = 14 to 18 GHz
fL = 4 to 9 GHz
fL = 9 to 18 GHz
fL = +7 dBm
dB
36
23
21
dB
32
18
16
dB
28
16
14
dB
38
23
21
dBm
+3
Input IP3
fR1=13 GHz at –10 dBm,fR2=13.01GHz at –10 dBm,
fL = 14 GHz at = +7 dBm
dBm
+10
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.