M79HC_15 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Double-Balanced Mixer

M79H / M79HC
Double-Balanced Mixer
Features
• LO 5 TO 18 GHz
• RF 7 TO 18 GHz
• IF DC TO 3000 MHz
• LO DRIVE: +20 dBm (NOMINAL)
• HIGH THIRD-ORDER I.P. +24 dBm (TYP.)
Description
The M79H is a double balanced mixer, designed for use in mili-
tary, commercial and test equipment applications. This mixer can
also be used as a phase detector or bi-phase modulator since the
IF port is DC coupled to the diodes. Environmental screening
available to MIL-STD-202, and MIL-DTL-28837, consult factory.
Product Image
Rev. V3
Ordering Information
Part Number
M79H
M79HC
Package
Minpac
SMA Connectorized
Electrical Specifications: Z₀ = 50Ω Lo = +20 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss
(max) & SSB Noise
Figure (max)
fR = 7 to 15 GHz, fL = 6 to 15 GHz, fI = 30 to 1000 MHz
fR = 7 to 16 GHz, fL = 5 to 18 GHz, fI = 30 to 2000 MHz
fR = 7 to 16 GHz, fL = 5 to 18 GHz, fI = 30 to 3000 MHz
fR = 16 to 18 GHz, fL = 5 to 15 GHz, fI = 30 to 3000 MHz
dB
dB
dB
dB
6.5
7.0
7.5
8.5
8.0
8.5
9.5
10.0
8.3
8.8
9.8
10.3
Isolation, L to R (min)
Isolation, L to I (min)
1 dB Conversion Comp.
fL = 5 to 14 GHz
fL = 14 to 18 GHz
fL = 5 to 9 GHz
fL = 9 to 18 GHz
fL = +20 dBm
dB
35
23
22
dB
30
20
19
dB
27
17
16
dB
35
25
24
dBm
+15
Input IP3
fR1=13 GHz at 0 dBm,fR2=13.01GHz at 0 dBm,
fL = 14 GHz at = 20 dBm
dBm
+24
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.