M6R Datasheet, PDF (1/3 Pages) Tyco Electronics – Double-Balanced Mixer

M6R
Double-Balanced Mixer
Features
• LO 10 TO 1200 MHz
• RF 10 TO 1000 MHz
• IF DC TO 1000 MHz
• LO DRIVE +7 dBm (nominal)
• HIGH ISOLATION 40 dB (TYP.)
Description
The M6R is a double balanced mixer, designed for use in military,
commercial, and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband ferrite baluns to attain
excellent performance. This mixer can also be used as a phase
detector and/or bi-phase modulator since the IF port is DC
coupled to the diodes. Environmental screening is available to
MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory.
Ordering Information
Part Number
M6R
Package
TO-8
Product Image
Rev. V2
Electrical Specifications: Z₀ = 50Ω Lo = +7 dBm (Downconverter Application only)
Parameter
Test Conditions
Units
Typical
25ºC
Guaranteed
0º to 50ºC -54º to +85ºC
SSB Conversion Loss &
SSB Noise Figure (max)
fR=20 to 600 MHz, fL=10 to 1000 MHz,fI=1 to 500 MHz
fR=10 to 1000 MHz, fL=10 to 1200 MHz,fI=1 to 200 MHz
fI=1 to 1000MHz
dB
dB
dB
6.0
7.5
8.5
7.0
8.5
9.5
7.5
9.0
10.0
Isolation, L to R (min)
fL = 10 to 100 MHz
fL = 100 to 500 MHz
fL = 500 to 1000 MHz
dB
55
45
43
dB
35
25
23
dB
25
20
18
Isolation, L to I (min)
fL = 10 to 100 MHz
fL = 100 to 500 MHz
fL = 500 to 1000 MHz
dB
40
30
28
dB
25
20
18
dB
20
15
13
1 dB Conversion
Compression
fL @ +7 dBm
dBm
+0
Input IP3
dBm
+13
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.