M63 Datasheet, PDF (1/3 Pages) Tyco Electronics – Double-Balanced Mixer

M63 / M63C
Double-Balanced Mixer
Features
• LO 2.5 TO 7 GHz
• RF 2.5 TO 5.5 GHz
• IF DC TO 1.5 GHz
• LO DRIVE: +9 dBm (NOMINAL)
• LOW NOISE FIGURE: 5.8 dB (TYP.)
Description
The M63 is a double balanced mixer, designed for use in military,
commercial and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband soft dielectric and
ferrite baluns to attain excellent performance. This mixer can also
be used as a phase detector and/or bi-phase modulator since the
IF port is DC coupled to the diodes. The use of high temperature
solder and welded assembly processes used internally makes it
ideal for use in manual, semi-automated assembly. Environmental
screening available to MIL-STD-883, MIL-STD-202, or
MIL-DTL-28837, consult factory.
Product Image
Rev. V3
Ordering Information
Part Number
M63
M63C
Package
Minpac
SMA Connectorized
Electrical Specifications: Z₀ = 50Ω Lo = +9 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss
(max) & SSB Noise Fig-
ure (max)
fR = 3.0 to 5.0 GHz, fL = 3.0 to 5.5 GHz, fI = 0.03 to 0.5 GHz
fR = 2.5 to 5.5 GHz, fL = 2.5 to 7 GHz, fI = 0.03 to 1.5 GHz
dB
dB
5.0
5.8
6.0
7.0
6.5
7.5
Isolation, L to R (min)
fL = 2.5 to 7 GHz
dB
40
30
28
Isolation, L to I (min)
1 dB Conversion Comp.
fL = 2.5 to 3.5 GHz
fL = 3.5 to 7 GHz
fL = +9 dBm
dB
25
17
15
dB
30
20
18
dBm
+2
Input IP3
fR1=4.00 GHz at –10 dBm,fR2=4.01GHz at –10 dBm,
fL = 22.8 GHz at = +9 dBm
dBm
+11
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.