M50A Datasheet, PDF (1/3 Pages) Tyco Electronics – Triple-Balanced Mixer

M50A / M50AC
Triple-Balanced Mixer
Features
• LO 2 TO 26 GHz
• RF 2 TO 18 GHz
• IF 1 TO 12 GHz
• LO DRIVE: +10 dBm (NOMINAL)
• HIGH COMPRESSION POINT
Product Image
Description
The M50A is a triple balanced mixer, designed for use in military,
commercial and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband soft dielectric baluns to
attain excellent performance. The use of high temperature solder and
welded assembly processes used internally makes it ideal for use in
manual, semi-automated assembly. Environmental screening
available to MIL-STD-883, MIL-STD-202 or MIL-DTL-28837, consult
factory.
Rev. V2
Ordering Information
Part Number
M50A
M50AC
Package
Minpac
SMA Connectorized
Electrical Specifications: Z₀ = 50Ω Lo = +10 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC *
SSB Conversion Loss
(max) & SSB Noise
fR = 2.5 to 18 GHz, fL =2 to 18 GHz, fI =1 to 10 GHz
dB
7.5
9.5
10.0
Figure (max)
fR = 2 to 18 GHz, fL =2 to 26 GHz, fI =1 to 12 GHz
dB
8.0
10.5
11.0
Isolation, L to R (min)
fL = 2 to 3 GHz
fL = 3 to 26 GHz
dB
22
15
dB
30
20
Isolation, L to I (min)
fL = 7 to 26 GHz
fL = 2 to 7 GHz
dB
30
20
dB
22
15
1 dB Conversion Comp.
fL @ +10 dBm
dBm
+5
Input IP3
fR1 =5 GHz @ -6 dBm, fR2 =5.01 GHz @ -6 dBm,
fL=8 GHz @ 10 dBm
dBm
+15
fR1= 15 GHz @ -6 dBm, fR2 = 15.01 GHz @ -6 dBm, dBm
+12
fL = 25 GHz @ 10 dBm
* The M50AC specification limits apply at 0ºC to +50ºC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.