M4T Datasheet, PDF (1/3 Pages) Tyco Electronics – Load Insensitive Mixer

M4T
Load Insensitive Mixer
Features
• LO 1 to 3400 MHz
• RF 1 to 3400 MHz
• IF 1 to 2000 MHz
• LO Drive +10 dBm (nominal)
• Insensitive to VSWR Mismatch
• High Intercept +18 dBm (typ)
Description
The M4T is a termination insensitive mixer, designed for use in
military, commercial and test equipment applications. The design
utilizes Schottky bridge quad diodes, broadband ferrite baluns and
internal loads to provide excellent performance without degrada-
tion due to external VSWR mismatches. The use of high tem-
perature solder and welded assembly processes used internally
makes it ideal for use in semi-automated and automated assem-
bly. Environmental screening available to MIL-STD-883, MIL-
STD-202, or MIL-DTL-28837, consult factory.
Ordering Information
Part Number
M4T
Package
Flatpack
Product Image
Rev. V3
Electrical Specifications: Z₀ = 50Ω Lo = +10 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss fR = 0.005 to 1.0 GHz, fL = 0.005 to 1.0 GHz, fI = 0.001 to 0.5 GHz
6.5
(max)
fR = 0.001 to 3 GHz, fL = 0.001 to 3 GHz , fI = 0.001 to 1.5 GHz
dB
8.0
fR = 0.001 to 3.4 GHz, fL = 0.001 to 3.4 GHz, fI = 0.001 to 2 GHz
9.0
7.5
9.0
10.5
8.0
9.5
11.0
SSB Noise Figure (max)
Within 1 db of conversion loss
dB
____
____
____
Isolation, L to R (min)
Isolation, L to I (min)
fL = 0.01 to 1.5 GHz
fL = 0.01 to 3.4 GHz
fL = 0.01 to 1.5 GHz
fL = 0.01 to 3.4 GHz
dB
40
30
35
25
33
23
dB
40
30
35
25
33
23
Isolation, R to I (min)
fR = 0.001 to 3.4 GHz
dB
25
1 dB Conversion Comp.
fL= +10 dBm
dBm
+6
Input IP3
fR1 = 1.9 GHz at -10 dBm, fR2 = 1.91 GHz at –10 dBm, fL = 2
GHz at +10 dBm
dBm
+18
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.