M3H-50 Datasheet, PDF (1/2 Pages) Tyco Electronics – Three-Way Power Dividers 1 - 100 MHz and 50 - 300 MHz

M3H-50 / M3V-50
Three-Way Power Dividers,
1 - 100 MHz and 50 - 300 MHz
Features
• Ideal for High Density Packaging
• High Isolation
• VSWR: 1.3:1 Max.
• Impedance: 50 Ohms Nominal
• Maximum Power Rating or Input Power: 1 Watt
Max.
• Internal Load Dissipation: 0.05 Watts Max.
• MIL-STD-202 Screening Available
Rev. V3
Description
A Power Divider is ideally a lossless reciprocal
device which can also perform vector summation of
two or more signals and thus is sometimes called a
power combiner or summer.
Pin Configuration
Pin No.
P1
P2
Function
Out
In
Pin No.
P3
P4
Function
Out
Out
M3H-50 Electrical Specifications¹: T_A = -55°C to +85°C
Parameter
Frequency
Insertion Loss
Isolation
Amplitude Balance
Phase Balance
VSWR
Test Conditions
—
Less Coupling
—
—
—
—
Frequency
1 - 100
1 - 100 MHz
1 - 100 MHz
1 - 100 MHz
1 - 100 MHz
1 - 100 MHz
Units
Min
Typ
Max
MHz
—
—
—
dB
—
—
0.5
dB
30
—
—
dB
—
—
0.2
°
—
—
1.0
Ratio
—
—
1.3:1
M3V-50 Electrical Specifications¹: T_A = -55°C to +85°C
Parameter
Frequency
Insertion Loss
Isolation
Amplitude Balance
Phase Balance
VSWR
Test Conditions
—
Less Coupling
—
—
—
—
Frequency
50 - 300 MHz
50 - 300 MHz
50 - 300 MHz
50 - 300 MHz
50 - 300 MHz
50 - 300 MHz
Units
Min
Typ
Max
MHz
—
—
—
dB
—
—
0.75
dB
25
—
—
dB
—
—
0.2
°
—
—
2.0
Ratio
—
—
1.3:1
1. All specification apply with 50 ohm source and load impedance.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.