M2B Datasheet, PDF (1/3 Pages) Tyco Electronics – Double-Balanced Mixer

M2B / M2BC
Double-Balanced Mixer
Features
• LO & RF: 10 TO 1600 MHz
• IF: DC TO 800 MHz
• LO DRIVE: +13 dBm (NOMINAL)
• HIGH ISOLATION: 40 dB (TYP.)
Description
The M2B is a double balanced mixer, designed for use in military,
commercial, and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband ferrite baluns to attain
excellent performance. This mixer can also be used as a phase
detector and/or bi-phase modulator since the IF port is DC cou-
pled to the diodes. Environmental screening is available to MIL-
STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory.
Ordering Information
Part Number
M2B
M2BC
Package
TO-8
SMA Connectorized
Product Image
Rev. V5
Electrical Specifications: Z₀ = 50Ω Lo = +13 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC *
SSB Conversion Loss
(max) & SSB Noise fR = 0.02 to 0.6 GHz, fL = 0.01 to 0.8 GHz, fI = 0.0004 to 0.2 GHz dB
7.0
8.0
8.5
Figure (max)
fR = 0.01 to 1.6 GHz, fL = 0.01 to 1.6 GHz , fI =0.0004 to 0.8 GHz dB
8.0
9.0
9.5
Isolation, L to R (min)
Isolation, L to I (min)
1 dB Conversion Comp.
fL = 0.01 to 0.7 GHz
fL = 0.7 to 1.2 GHz
fL = 1.2 to 1.6 GHz
fL = 0.01 to 0.7 GHz
fL = 0.7 to 1.2 GHz
fL = 1.2 to 1.6 GHz
fL = +13 dBm
dB
50
40
38
dB
45
30
28
dB
35
25
23
dB
40
30
28
dB
30
20
18
dB
25
18
16
dBm
+7
Input IP3
dBm
+22
* The M2BC specification limits apply at 0ºC to +50ºC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.