English
Language : 

M1K Datasheet, PDF (1/2 Pages) Tyco Electronics – Double-Balanced Mixer
M1K
Double-Balanced Mixer
Features
• LO and RF: 1.0 to 4.0 GHz
• IF: DC to 1000 MHZ
• LO Drive +20 dBm (nominal)
• High Intercept Point: +28 dBm (Typ.)
Rev. V2
Guaranteed Specifications1
Characteristics
SSB Conversion Loss
And
SSB Noise Figure
Min
Typ.
Max.
Test Conditions
9.0 dB
11.0 dB
fL 1.2 to 4.0 GHz
fR 1.2 to 3.5 GHz
fI 10 to 500 MHz
fL & fR 1.0 to 4.0 GHz
fI 10 to 1000 MHz
Isolation
fL at R
fL at I
Conversion Compression
20 dB
10 dB
15 dB
31 dB
19 dB
25 dB
1.0 dB
fL 1.0 to 4.0 GHz
fL 1.0 to 2.0 GHz
fL 2.0 to 4.0 GHz
fL = +20 dBm
fR = +13 dBm
Notes:
1. Measure in a 50-Ohm system with nominal LO drive and
downconverter application only, unless otherwise specified. The
I-Port frequency range extends to DC for phase detection, pulse
modulation, or attenuator applications, I-Port VSWR degrades
from a 50-Ohm system at low IF frequencies.
Absolute Maximum Ratings
Storage Temperature
Operating Temperature
Without Specification Degradation
With dB Noise Figure Degradation
Peak RF Input Power
-65oC to +100oC
-54oC to +85oC
-54oC to +100oC
+26 dBm, at +25oC
Weight 33 gram (1.164 oz) max.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.