English
Language : 

M02094-12 Datasheet, PDF (1/46 Pages) M/A-COM Technology Solutions, Inc. – EPON FTTH modules
M02094-12
3.3 or 5 Volt VCSEL/FP Laser Driver IC for Applications to 2 Gbps
Rev V5
Applications
• EPON FTTH modules
• Gigabit Ethernet modules
• 1G/2G Fibre Channel modules
• Digital Video
Features
• High speed operation; suitable for SFP/SFF applications from
155Mbps to 2.0 Gbps. Typical rise/fall times < 110 ps.
• Supports Common Anode VCSEL, Common Cathode VCSEL, or FP
LASER. May be used with or without a monitor photodiode.
• Programmable temperature compensation. Modulation output and
bias output can be controlled using a few discrete resistors.
• Supports DDMI (SFF-8472) diagnostics.
• DC or AC coupled modulation drive.
• Peaking circuit to optimize VCSEL response.
• Low overshoot allows high extinction ratio with low jitter.
• Supports E-PON burst mode with no extra components
• Automatic Laser Power Control, with “Slow-Start”.
• 3.3V or 5V operation
The M02094 is a highly integrated, programmable VCSEL driver intended for SFP/SFF modules to 2.0 Gbps. Using
differential PECL data inputs, the M02094 supplies the bias and modulation current required to drive a VCSEL or
edge-emitting laser. The modulation output can be AC or DC-coupled to a FP laser diode or AC coupled to a com-
mon anode or common cathode VCSEL.
Peaking adjustment is available to improve VCSEL fall time.
EPON burst mode operation is supported with no extra components.
Integrated safety circuitry detects faults and provides latched bias and modulation current shutdown.
Functional Block Diagram
DIN +
D IN-
Internal
3.3V reg.
Internal Power Bus
Input
Buffer
VCC3 -1.3V
Output
Buffer
Laser
Driver
TX
Disable
Safety
Circuitry with
Latched Fault
Modulation
Control
Automatic Power Control
(laser bias current)
SVCC and
IBO UT_ CC
OUT-
OUT+
GND0
IB O UT_ CA
and
SGND
IPIN
CCS E L
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
http://www.macom.com/support