JH-140 Datasheet, PDF (1/2 Pages) Tyco Electronics – High-Frequency Quadrature Hybrid 500 - 1000 MHz

JH-140
High Frequency Quadrature Hybrid,
500 - 1000 MHz
Features
• Octave Bandwidth
• Low VSWR: 1.2:1 Typical
• Miniature Size: 1/2” x 3/8” Flatpack
• Impedance: 50 Ohms Nominal
• Input Power: 25 Watts Max @ +25°C, Derated to
1 Watt @ +85°C
• MIL-STD-202 Screening Available
FP-2
Rev. V3
Description
3 dB Hybrids are ideal for dividing a signal into two
signals of equal amplitude and a constant 90° or
180° phase differential and for Quadrature combin-
ing or performing summation/differential combining.
Phasing Diagram
OUT
A
IN
A
B
C
D
ISO
-90°
0°
B
ISO
C
-90°
0°
0°
-90°
ISO
Pin Configuration
D
0°
-90°
ISO
Pin No.
1
2
3
4
Function
A
GND
GND
B
Pin No.
5
6
7
8
Electrical Specifications¹: T_A = -55°C to +85°C
Parameter
Insertion Loss ²
Isolation
Amplitude Balance
VSWR
Deviation from
Quadrature
Test Conditions
Less Coupling
—
—
—
—
Frequency
Units
Min
Typ
500 - 1000 MHz
dB
—
—
500 - 1000 MHz
dB
18
—
500 - 1000 MHz
dB
—
—
500 - 1000 MHz
Ratio
—
—
500 - 1000 MHz
°
—
—
Function
D
GND
GND
C
Max
0.3
—
1.0
1.3:1
3
1. All specifications apply with 50 ohm source and load impedance.
2. Average of coupled output less 3 dB.
This product contains elements protected by United States Patent Number 3,484,724.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.