JH-131 Datasheet, PDF (1/2 Pages) Tyco Electronics – Three-Port Quadrature Hybrid 20 - 200 MHz

JH-131
Three-Port Quadrature Hybrid,
20 - 200 MHz
Features
• Internally Terminated Fourth Port
• Amplitude Balance 0.4 dB
• Impedance: 50 Ohms Nom.
• Input Power: 250 mW. Max.
• MIL-STD_202 Screening Available
C-13
Rev. V2
Guaranteed Specifications*: From –55^oC to +85^oC
Frequency Range
Insertion Loss (less coupling)
Isolation
Amplitude Balance
VSWR (All Ports)
Deviation From Quadrature
* All specifications apply with 50 Ohm source and load impedance.
20 - 200 MHz
1.0 dB Max
20 dB Min
0.4 dB Max.
1.4:1 Max
6^o Max.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.