HH-105 Datasheet, PDF (1/2 Pages) Tyco Electronics – Hybrid Junction 20 - 300 MHz

HH-105
Hybrid Junction,
20 - 300 MHz
Features
• 0^o - 180^o Hybrid in TO-5 Package
• High Isolation
• MIL-STD-883 Screening Available
Description
3 dB Hybrids are ideal for dividing a signal into two
signals of equal amplitude and a constant 90° or
180° phase differential and for Quadrature
combining or performing summation/differential
combining.
TO-5-2
Pin Configuration
Pin No.
1
2
Function
A
B
Pin No.
3
7
Function
D
C
Rev. V3
Electrical Specifications¹: T_A = -55°C to +85°C
Parameter
Insertion Loss
Test Conditions
Less Coupling
Frequency
20 - 300 MHz
Isolation
—
Amplitude Balance²
—
20 - 300 MHz
20 - 300 MHz
VSWR
—
Phase Balance²
—
20 - 300 MHz
20 - 300 MHz
Impedance
Input Power
—
20 - 300 MHz
—
20 - 300 MHz
Units
Min
Typ
Max
dB
—
—
1.0
dB
28
—
—
dB
—
—
0.25
Ratio
—
°
—
—
1.3:1
—
2
Ohms
—
50
—
Watts
—
—
0.5
1. All specifications apply with 50 ohm source and load impedance.
This product contains elements protected by United States Patent umber 3,508,171
2. Differences measure between C & D feeding A or B.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.