G30_SMG30 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Voltage-Controlled Attenuator Module

G30 / SMG30
Voltage-Controlled Attenuator Module
100 to 2000 MHz
Rev. V3
Features
• FAST SWITCHING: < 0.2 µsec, 10 TO 90% (TYP.)
< 1 µsec, 0 TO 100% (TYP.)
• HIGH DYNAMIC RANGE: 40 dB TO 1000 MHz (TYP.)
• LOW VSWR: 1.4:1 (TYP.)
Description
The G30 attenuator is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance and
high reliability.
This design uses three pin diodes to provide a non linear
attenuation response across a broadband frequency range.
Both TO-8 and Surface Mount packages are hermetically sealed,
and MIL-STD-883 environmental screening is available.
Ordering Information
Product Image
Part Number
Package
G30
TO-8
SMG30
Surface Mount
CG30 **
SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Parameter
Units
Typical
25ºC
Guaranteed
0º to 50ºC
-54º to +85ºC*
Frequency
MHz
5-2200
100-2000
100-2000
Maximum Attenuation Available (min)
100-500 MHz
dB
>50
40
37
500-1000 MHz
dB
>44
35
32
1000-2000 MHz
dB
>38
30
27
Insertion Loss (Vctrl = +15 V) (max)
100-500 MHz
dB
<2.1
2.8
3.0
500-1000 MHz
dB
<2.3
3.0
3.2
1000-2000 MHz
dB
<3.0
3.5
3.8
VSWR (worst case in attenuation range)
0-25 dB Attenuation
>25 dB Attenuation
dB
1.4:1
dB
<1.7:1
2.0:1
2.2:1
2.0:1
2.2:1
Flatness Over Frequency (max)
(Attenuation = min to 15 dB, 100-1000 MHz)
100-1000 MHz
dB
±0.5
±1.0
±1.0
1000-2000 MHz
dB
±1.0
±1.5
±1.7
Switching Speed (max.)
10% - 90%
0% - 100%
µsec
<0.2
0.4
0.6
µsec
<1
2
3
Bias Voltage
Volts
+15
+15
+15
Bias Current (max)
mA
7
10
12
Control Voltage
Volts
0 to +15
0 to +15
0 to +15
Control Current (max)
mA
7
10
10
*Over temperature performance limits for part number CG30, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.