G1_SMG1 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Voltage-Controlled Attenuator Module

G1 / SMG1
Voltage-Controlled Attenuator Module
5 to 2000 MHz
Features
• AVAILABLE IN SURFACE MOUNT
• LOW VSWR: < 1.8:1 (TYP.)
• LOW INSERTION LOSS: 2.0 dB TO 1000 MHz (TYP.)
• LOW DISTORTION: -25 dBc (TYP.) AT V_control = +15 V
Description
The G1 attenuator is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance and
high reliability.
This design uses three pin diodes to provide a non linear
attenuation response across a broadband frequency range.
Both TO-8 and Surface Mount packages are hermetically sealed,
and MIL-STD-883 environmental screening is available.
Ordering Information
Product Image
Rev. V4
Part Number
G1
SMG1
CG1 **
Package
TO-8
Surface Mount
SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Parameter
Units
Typical
25ºC
Guaranteed
0º to 50ºC
-54º to +85ºC*
Frequency
MHz
5-2200
5-2000
5-2000
Maximum Attenuation Available (min)
5-500 MHz
dB
36
31
30
500-1000 MHz
dB
30
25
24
1000-2000 MHz
dB
23
18
17
Insertion Loss (Vctrl = +15 V) (max)
5-1000 MHz
dB
2.0
2.5
2.8
1000-2000 MHz
dB
2.5
3.0
3.3
VSWR (worst case in attenuation range)
5-2000 MHz
dB
<1.8:1
2.2:1
2.3:1
Flatness Over Frequency (max)
(Attenuation = min to 15 dB, 5-1000 MHz)
dB
+/-0.5
+/-1.0
+/-1.2
Switching Speed (max.)
10% - 90%
0% - 100%
µsec
60
µsec
75
120
140
125
140
Bias Voltage
Volts
+15
+15
+15
Bias Current
mA
10
15
15
Control Voltage
Volts
0 to +15
0 to +15
0 to +15
Control Current (max)
mA
4
7
7
*Over temperature performance limits for part number CG1, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.