FD26 Datasheet, PDF (1/3 Pages) Tyco Electronics – Frequency Doubler

FD26 / FD26C / FD26E / SFD26
Frequency Doubler
Features
• INPUT: 50 TO 3300 MHz
• OUTPUT: 100 TO 6600 MHz
• INPUT DRIVE LEVEL +10 dBm (NOMINAL)
• HERMETICALLY-SEALED PACKAGE
Description
The FD26 is a passive bridge diode frequency doubler, designed
for use in military, commercial and test equipment applications.
The design utilizes Schottky bridge quad diodes and broadband
soft dielectric and/or ferrite baluns to attain excellent performance.
The use of high temperature solder assembly processes used
internally makes it ideal for use in manual and semi-automated
assembly. Environmental screening available to MIL-STD-883,
MIL-STD-202, or MIL-DTL-28837, consult factory.
Product Image
Rev. V2
Ordering Information
Part Number
FD26
FD26C
FD26E
SFD26
Package
TO-8
SMA Connectorized
Flatpack
Surface Mount
Electrical Specifications: Z₀ = 50Ω P_in = +10 dBm
Parameter
Test Conditions
Units
Typical
SSB Conversion Loss
(max)
Fundamental
Suppression (min)
f_in = 5 to 400 MHz
f_in = 400 to 2500 MHz
f_in = 2500 to 3000 MHz
f_in = 3000 to 3300 MHz
f_in = 50 to 500 MHz
f_in = 500 to 3300 MHz
dB
12.0
dB
12.0
dB
12.5
dB
13.5
dBc
25
dBc
20
Guaranteed
+25ºC -54º to +85ºC*
14.5
15.0
13.5
14.0
14.0
14.5
15.5
16.0
22
20
17
15
Third Harmonic
Suppression
Input VSWR
f_in = 50 to 200 MHz
f_in = 200 to 3300 MHz
f_in = 50 to 2500 MHz
f_in = 2500 to 3300 MHz
dBc
25
22
20
dBc
19
17
15
1.5:1
2.0:1
* The FD26C specification limits apply at 0ºC to +50ºC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.