FD25H_V3 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Frequency Doubler

FD25H / FD25HC / SFD25H
Frequency Doubler
Features
• IINPUT: 5 TO 2400 MHz
• OUTPUT: 10 TO 4800 MHz
• INPUT DRIVE LEVEL +23 dBm (NOMINAL)
• HERMETICALLY-SEALED PACKAGE
Description
The FD25H is a passive bridge diode frequency doubler, designed
for use in the high volume commercial and test equipment applica-
tions. The design utilizes Schottky bridge quad diodes and broad-
band baluns to attain excellent performance. The use of high tem-
perature solder and welded assembly processes used internally
makes it ideal for use in semi-automated and automated assembly.
Environmental screening available to MIL-STD-883, MIL-STD-202,
or MIL-DTL-28837, consult factory.
Ordering Information
Part Number
FD25H
Package
TO-8
FD25HC
SMA Connectorized
SFD25H
Surface Mount
MAUC-010499-SFD25H
Surface Mount Screened
Product Image
Rev. V3
Electrical Specifications: Z₀ = 50Ω P_in = +23 dBm
Parameter
Test Conditions
Units
Typical
SSB Conversion Loss
(max)
f_in = 5 to 2400 MHz
dB
12.0
Guaranteed
+25ºC -54º to +85ºC*
13.5
13.8
Fundamental
Suppression (min)
Third Harmonic
Suppression
Input VSWR
f_in = 5 to 1000 MHz
f_in = 1000 to 2000 MHz
f_in = 2000 to 2400 MHz
f_in = 5 to 500 MHz
f_in = 500 to 2400 MHz
f_in = 5 to 2400 MHz
dBc
35
25
24
dBc
25
20
19
dBc
20
16
15
dBc
40
30
29
dBc
35
25
24
1.5:1
* The FD25HC specification limits apply at 0ºC to +50ºC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.