ETM4-1T-2 Datasheet, PDF (1/2 Pages) Tyco Electronics – 00.05 - 3.072 MHz E-Series RF 4:1 Transformer

ETM4-1T-2
4:1 RF Transformer
0.05 - 3.072 MHz
Features
• Surface Mount
• 4:1 Impedance
• CT on Secondary
• 50 Ohm
Description
M/A-COM’s ETM4-1T-2 is a 4:1 RF Transformer in a
low cost surface mount package. Ideally suited for
high volume CATV application.
Schematic
Z₀
M/A-COM Products
Part Status: Released Rev V5
4xZ₀
Case Style SM-1
Pin Configuration
Function
Secondary Dot
Secondary Centre Tap
Secondary
Primary
Not Connected
Primary Dot
Pin Number
1
2
3
4
5
6
Ordering Information
Part Number
ETM4-1T-2TR
Package
900 pieces per reel
Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: [phone] • Europe Tel: [phone]
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.