ETC16-1T-2TR Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – E-Series RF 1:16 Transformer 5-40 MHz

ETC16-1T-2TR
E-Series RF 1:16 Transformer
5-40 MHz
Features
• 1:16 Impedance Ratio
• CT on Secondary
• Surface Mount
• Tape and reel packaging available
• 260°C Reflow Compatible
Description
M/A-COM’s ETC16-1T-2TR is a 1:16 RF transformer in a low
cost, surface mount package. Ideally suited for high volume
cellular and wireless applications. Typical applications include
single to balanced mode conversion and impedance match-
ing.
The ETC16-1T-2TR is available in a SM-22 surface mount
package. Parts are packaged in tape & reel.
Ordering Information
Part Number
ETC16-1T-2TR
Package
Tape and Reel (2000 piece Reel)
Product Image
M/A-COM Products
Advanced - Rev. V2
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω
Parameter
Test Conditions Frequency Units
Min Typ Max
RF Frequency
—
Insertion Loss
—
Amplitude Imbalance
—
Phase Imbalance
—
5 - 40
5 - 40
22
5 - 40
5 - 40
MHz
—
dB
—
dB
dB
—
Degrees —
—
—
—
1.0
0.8
—
0.3
—
3
Pin Configuration
Pin No.
Function
1
Secondary
2
Secondary CT
3
Secondary Dot
4
Primary Dot
5
Primary
Absolute Maximum Ratings
Parameter
RF Power
DC Current
Operating Temperature
Storage Temperature
Absolute Maximum
250 mW
240 mA²
-40°C to +85°C
-55°C to +125°C
1. Exceeding any one or combination of these limits may cause perma-
nent damage to this device.
Schematic
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.