ETC1.5-4TR Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Surface mount

ETC1.5-4TR
RF 1.5:1 Step-down Auto-Transformer
5MHz - 1000MHz
Features
 Surface mount
 1.5:1 Impedance ratio
 Available on tape and reel
Description
M/A-Com’s ETC1.5-4 is a 1.5:1 RF step-down auto-transformer
In a low cost, surface mount package. Ideally suited for high volume
applications
Rev. V2
Electrical Specifications: Z₀ = 75Ω, T_A = 25°C, P_in = 0dBm
Parameter
Frequency Range
Impedance
Impedance Ratio
Insertion Loss
(Pin3 - Pin4)
Conditions
5 - 200MHz
@1000 MHz
Units
Min
Typ
Max
MHz
5
1000
Ω
75
1.5:1
dB
-
0.40
0.60
dB
-
0.78
1.09
Input Return Loss
(Pin3)
5 - 1000 MHz
dB
20
30
-
-
Pin Configuration:
Pin No.
3
5
5
4
1,2
Function
Primary Dot
Primary
Secondary
Secondary Dot
Not Connected
Schematic:
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.