ESMD-C50H Datasheet, PDF (1/3 Pages) Tyco Electronics – E-Series Surface Mount Mixer 80 - 2500 MHz

E-Series Surface Mount Mixer — 80 - 2500 MHz
E-Series Surface Mount Mixer
80 – 2500 MHz
ESMD-C50H
ESMD-C50H
Features
• LO Power +17 dBm
• Up to +14 dBm RF
• Surface Mount
Description
M/A-COM’s ESMD-C50H is a Low Cost, Passive Double
Double Balanced Mixer. Constructed using very broad band
ferrite balun transformers and matched silicon schottky diodes,
it’s performance is especially suited to high dynamic range
receivers. Given it’s high 1dB compression point, the ESMD-
C50H is also suitable for Transmitter upconversion at any
frequency up to 2.5GHz.
Schematic
SM-2 Package
·
Electrical Specifications @ +25°C
Part Number
ESMD-C50H
ESMD-C50HTR
Packaging
Tube
Tape and Reel
Parameter
Units Minimum Typical
Maximum
Mean (x) _{Sigma (σ)}
Frequency Range
80 - 2500 MHz
—
—
—
—
—
—
IF 1.0 dB Bandwidth = DC - 1000 MHz
—
—
—
—
—
—
Conversion Loss
80 - 1000 MHz
dB
—
—
7.5
6.10
0.15
1000 - 2500 MHz
dB
—
—
9.0
7.34
0.29
L - R Isolation
80 - 1000 MHz
dB
25.0
33.5
—
—
—
1000 - 2500 MHz
dB
20.0
28.9
—
—
—
L - I Isolation
80 - 1000 MHz
dB
26.0
31.5
—
—
—
1000 - 2500 MHz
dB
13.5
17.4
—
—
—
R - I Isolation
80 - 1000 MHz
dB
20.0
26.9
—
—
—
1000 - 2500 MHz
dB
20.0
25.9
—
—
—
LO VSWR
80 - 1000 MHz
—
—
1.42
2.0
—
—
1000 - 2500 MHz
—
—
1.63
2.5
—
—
RF VSWR
80 - 1000 MHz
—
—
1.72
2.8
—
—
1000 - 2500 MHz
—
—
1.71
2.4
—
—
IF VSWR
DC - 600 MHz
—
—
2.55
3.2
—
—
Input IP3
200 - 1000 MHz
dBm
21.0
27.0
—
—
—
1000 - 2500 MHz
dBm
18.0
25.0
—
—
—
Input 1dB Compression
dBm
—
+14.0
—
—
—
Test Conditions: LO Drive = +17dBm, IF frequency = 70MHz. Mean and Sigma calculated at 900MHz & 1800MHz.
V2.00
S 1254 D
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: [phone] • Europe Tel: [phone]
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product
information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make