ELCM-2 Datasheet, PDF (1/2 Pages) Tyco Electronics – E-Series Surface Mount Mixer 5 - 1000 MHz

E-Series Surface Mount Mixer — 5 - 1000 MHz
E-Series Surface Mount Mixer
5 – 1000 MHz
Features
• LO Power +7 dBm
• Up to +1 dBm RF
• Surface Mount
• Low Profile
SM-89 Package
Note: Non Hermetic Package
ELCM-2
ELCM-2
Description
M/A-COM’s ELCM-2 is a Low Cost, Broadband, high
performance Double Balanced Mixer designed for use in high
volume wireless applications. The device has been optimised by
careful selection of the Schottky Diode and Balun Transformer
for excellent performance. ELCM-2 is available in an SM-89
surface mount package and reflows using standard soldering
reflow profiles.
Electrical Specifications @ +25°C, Z₀ = 50 Ohms, LO = +7dBm
Parameter
Frequency Range
RF
5 - 1000
LO
5 - 1000
IF
DC - 1000
Units
MHz
MHz
MHz
Minimum
—
—
—
Conversion Loss
10 - 500
5 - 1000
dB
—
dB
—
Typical
—
—
—
6.5
7.0
Maximum
—
—
—
8.0
9.5
Isolation (LO - RF)
5 - 300
300 - 500
500 - 1000
Isolation (LO - IF)
5 - 50
50 - 500
500 - 1000
MHz
40
50
—
MHz
20
40
—
MHz
18
25
—
MHz
45
55
—
MHz
20
30
—
MHz
12
20
—
RF Input for 1dB Compression
dBm
—
—
+1
V3.00
S 1352
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is
• North America Tel: [phone] • Europe Tel: [phone]
considering for development. Performance is based on target specifications, simulated results, and/or
• India Tel: [phone]
• China Tel: [phone]
prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions
has under development. Performance is based on engineering tests. Specifications are typical.
Visit www.macomtech.com for additional data sheets and product infor-
mation.
Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment
to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes