EA2_15 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier

EA2
Cascadable Amplifier
5 to 400 MHz
Features
 LOW COST
 MEDIUM OUTPUT LEVEL: +9 dBm (TYP.)
 ULTRA SMALL SIZE
Product Image
Description
The EA2 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance and
high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency
range. The unit is packaged in a TO-5 hermetically sealed, and
MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
EA2
Package
TO-5
Rev. V2
Electrical Specifications: Z₀ = 50, V_CC = +15 V_DC
Parameter
Units
Typical
Guaranteed
0º to 50ºC -54º to +85ºC
Frequency
MHz
5-400
5-400
5-400
Small Signal Gain (min)
dB
13.5
13.0
12.5
Gain Flatness (max)
dB
±0.3
±1.0
±1.2
Noise Figure (max)
dB
5.7
6.5
7.0
Power Output
@ 1 dB Compression (min)
dBm
+9.0
+6.5
+6.0
Absolute Maximum Ratings
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+17 V
Continuous Input Power
13 dBm
CW Input power
(1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
+125ºC
IP3
dBm
+21
IP2
dBm
+28
Thermal Data: V_CC = +15 V_DC
Parameter
Rating
2nd Order Harmonic IP
dBm
+33
Thermal Resistance θ_jc
45ºC/W
VSWR Input / Output (max)
DC Current @ 15 Volts (max) mA
1
1.6:1
26
1.9:1
27
2.0:1
29
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
0.068 W
3ºC
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support