EA2 Datasheet, PDF (1/2 Pages) Tyco Electronics – Cascadable Amplifier 5 to 400 MHz

EA2
Cascadable Amplifier
5 to 400 MHz
Features
• LOW COST
• MEDIUM OUTPUT LEVEL: +9 dBm (TYP.)
• ULTRA SMALL SIZE
Product Image
Description
The EA2 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance and
high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency
range. The unit is packaged in a TO-5 hermetically sealed, and
MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
EA2
Package
TO-5
Rev. V2
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Parameter
Units
Typical
Guaranteed
0º to 50ºC -54º to +85ºC
Frequency
MHz
5-400
5-400
5-400
Small Signal Gain (min)
dB
13.5
13.0
12.5
Gain Flatness (max)
dB
±0.3
±1.0
±1.2
Noise Figure (max)
dB
5.7
6.5
7.0
Power Output
@ 1 dB Compression (min)
dBm
+9.0
+6.5
+6.0
Absolute Maximum Ratings
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+17 V
Continuous Input Power
13 dBm
CW Input power
(1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
+125ºC
IP3
dBm
IP2
dBm
2nd Order Harmonic IP
dBm
VSWR Input / Output (max)
DC Current @ 15 Volts (max) mA
+21
+28
+33
1.6:1
26
1.9:1
27
2.0:1
29
Thermal Data: V_CC = +15 V_DC
Parameter
Rating
Thermal Resistance θ_jc
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
45ºC/W
0.068 W
3ºC
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.