DS58-0001 Datasheet, PDF (1/3 Pages) Tyco Electronics – Low Cost Eight-Way GMIC SMT Power Divider 824 - 960 MHz

DS58-0001
Low Cost Eight-Way GMIC SMT Power Divider
824 – 960 MHz
Rev. V2
Features
• Small Size, Low Profile
• Superior Repeatability (Lot-to-Lot Variation)
• Typical Isolation: 30 dB
• Typical Insertion Loss: 1.5 dB
• Low Cost
• 1 Watt Power Handling
• QSOP-20 Package
Description
M/A-COM’s DS58-0001 is an IC-based monolithic
power divider in a low cost QSOP-20 plastic pack-
age. This 8-way power divider is ideally suited for
applications where PCB real estate is at a premium
and part count reduction and cost are critical. Typical
applications include base station switching networks
and other cellular equipment, including subscriber
units. Available in tape and reel.
The DS58-0001 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and reli-
ability.
Ordering Information
Part Number
DS58-0001
DS58-0001-TR
DS58-0001SAM
Package
Bulk Packaging
1000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
Functional Block Diagram
1. Pins 1, 3, 5, 7, 9, 12, 14, 16, 18, and 20 should be RF and
DC grounded.
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
9
10
Function
GND
RF 4 (OUT)
GND
RF 3 (OUT)
GND
RF 2 (OUT)
GND
RF 1 (OUT)
GND
RF IN
Pin No.
11
12
13
14
15
16
17
18
19
20
Function
NC
GND
RF 8 (OUT)
GND
RF 7 (OUT)
GND
RF 6 (OUT)
GND
RF 5 (OUT)
GND
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.