DS56-0005 Datasheet, PDF (1/4 Pages) Tyco Electronics – Low Cost Six-Way SMT Power Divider 824 - 960 MHz

DS56-0005
Low Cost Six-Way Power Divider
824 – 960 MHz
Rev. V4
Features
• Small Size, Low Profile
• Superior Repeatability (Lot-to-Lot Variation)
• Typical Isolation 25 dB
• Typical Insertion Loss 0.8 dB
• Low Cost
• SOIC-16 Package
Description
M/A-COM’s DS56-0005 is an IC-based monolithic
power divider in a low cost SOIC-16 plastic package.
The 6-way power divider is ideally suited for applica-
tions where PCB real estate is at a premium and
part count reduction and cost are critical. Typical
applications include base station switching networks
and other cellular equipment, including subscriber
units. Available in Tape and Reel.
The DS56-0005 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and reli-
ability.
Functional Block Diagram¹
1. All unused pins must be RF and DC grounded.
Ordering Information
Part Number
DS56-0005
DS56-0005-TR
Package
Bulk Packaging
1000 piece reel
Note: Reference Application Note M513 for reel size
information.
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
Function
GND
RF 3 (OUT)
GND
RF 2 (OUT)
GND
RF 1 (OUT)
GND
RF IN
Pin No.
9
10
11
12
13
14
15
16
Function
GND
GND
RF 6 (OUT)
GND
RF 5 (OUT)
GND
RF 4 (OUT)
GND
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.