DS56-0001 Datasheet, PDF (1/4 Pages) Tyco Electronics – Low Cost Six-Way SMT Power Divider 824 - 960 MHz

DS56-0001
Low Cost Six-Way SMT Power Divider
824 - 960 MHz
Features
• Small Size, Low Profile
• Superior Repeatability (Lot-to-lot Variation)
• Industry Standard SOW-16 SMT Plastic Package
• Typical Isolation: 25 dB
• Typical Insertion Loss: 0.3 dB
• Low Cost
• 1 Watt Power Handling
• SOW-16 Package
Description
M/A-COM’s DS56-0001 is an IC-based monolithic
power divider in a low cost SOW-16 plastic package.
This 6-way power divider is ideally suited for applica-
tions where PCB real estate is at a premium and
part count reduction and cost are critical. Typical
applications include base station switching networks
and other cellular equipment, including subscriber
units. Available in tape and reel.
The DS56-0001 is fabricated using a passive-
integrated circuit process. The process features full-
chip passivation for increased performance and reli-
ability.
Ordering Information
Part Number
DS56-0001
DS56-0001-TR
DS56-0001SAM
Package
Bulk Packaging
1000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
Functional Diagram¹
Rev. V5
1. Pins 2, 4, 6, 8, 9, 10, 11, 13, and 15 must be DC and RF
grounded.
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
Function
RF3 (OUT)
GND
RF2 (OUT)
GND
RF1 (OUT)
GND
RF IN
GND
Pin No.
9
10
11
12
13
14
15
16
Function
GND
GND
GND
RF6 (OUT)
GND
RF5 (OUT)
GND
RF4 (OUT)
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.