DS52-0004 Datasheet, PDF (1/4 Pages) Tyco Electronics – Low Cost Two-Way SMT Power Diveder 1510-1660MHz

DS52-0004
Low Cost Two-Way SMT Power Divider
1510-1660 MHz
Features
• Small Size and Low Profile
• SOIC-8 Package
• Excellent Amplitude and Phase Balance
• Superior Repeatability
• Typical Insertion Loss 0.4 dB
• Typical Isolation 20 dB
• 1 Watt Power Handling
• Frequency Coverage for GPS and LEO Pro-
grams
Description
M/A-COM’s DS52-0004 is an IC-based monolithic
power divider in a low cost SOIC-8 plastic package.
This 2-way power divider is ideally suited for
applications where small size, low insertion loss,
superior phase/amplitude tracking and low cost are
required. Typical applications include base station
switching networks and other communication appli-
cations where size and PCB real estate are a pre-
mium. Available in tape and reel.
The DS52-0004 is fabricated using a passive-
integrated circuit process. The process features
full-chip passivation for increased performance and
reliability.
Ordering Information
Part Number
DS52-0004
DS52-0004-TR
DS52-0004SAM
Package
Bulk Packaging
1000 Piece Reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
Functional Diagram
Rev. V4
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
Function
GND
RF-IN
GND
GND
RF-1 (out)
GND
GND
RF-2 (out)
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.