DS-327 Datasheet, PDF (1/2 Pages) Tyco Electronics – Flatpack Two-Way Power Divider 5 - 1000 MHz

DS-327
Flatpack Two-Way Power Divider,
5 - 1000 MHz
Features
n Broadband, IN Phase Divider
n Low Loss: 0.3 dB Typical
n Amplitude Balance: 0.05 dB Typical
n Impedance: 50 Ohms Nominal
n Maximum Power Rating or Input Power: 1 Watt Max.
n Internal Load Dissipation: 0.05 Watts Max.
n MIL-STD-883 Screening Available
Description
A Power Divider is ideally a loss less reciprocal device
which can also perform vector summation of two or more
signals and thus is sometimes called a power combiner or
summer.
FP-2
Pin Configuration
Pin No.
1
2
3
4
Function
Σ
GND
GND
Output C
Pin No.
5
6
7
8
Function
GND
GND
GND
Output D
Rev. V3
Electrical Specifications¹: T_A = -55°C to +85°C
Parameter
Insertion Loss
Isolation
Amplitude Balance
Phase Balance
VSWR
Test Conditions
Less Coupling
—
—
—
Input
Output
Frequency
5 - 500 MHz
500 - 1000 MHz
5 - 500 MHz
500 - 1000 MHz
5 - 1000 MHz
5 - 500 MHz
500 - 1000 MHz
10 - 500 MHz
5 - 1000 MHz
Units
Min
dB
—
dB
—
dB
25
dB
20
dB
—
°
—
°
—
Ratio
—
Ratio
—
Typ
—
—
—
—
—
—
—
—
—
Max
0.5
1.0
—
—
0.2
2
3
1.3:1
1.5:1
1. All specifications apply with 50 ohm source and load impedance.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is
• North America Tel: [phone] • Europe Tel: [phone]
considering for development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline
has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
not guaranteed.
changes to the product(s) or information contained herein without notice.