DS-324 Datasheet, PDF (1/2 Pages) Tyco Electronics – Flatpack Four-Way Power Divider 25 - 1000 MHz

DS-324
Flatpack Four-Way Power Divider,
25 - 1000 MHz
Features
• Insertion Loss: 0.5 dB Typical Midband
• Isolation: 38 dB Typical Midband
• VSWR: 1.2:1 Typical Midband
• Impedance: 50 Ohms Nominal
• Maximum Power Rating or Input Power: 1 Watt Max.
• Internal Load Dissipation: 0.05 Watts Max.
• MIL-STD-883 Screening Available
Description
A Power Divider is ideally a lossless reciprocal
device which can also perform vector summation of two
or more signals and thus is sometimes called a power
combiner or summer.
Pin Configuration
FP-5
Rev. V5
Pin No.
1
2
3
4
5
6
7
Function
GND
None
None
Input
GND
None
GND
Pin No.
8
9
10
11
12
13
14
Function
Output
GND
Output
GND
Output
GND
Output
Electrical Specifications¹: T_A = -55°C to +85°C
Parameter
Insertion Loss
Test Conditions
Less Coupling
Frequency
25 - 200 MHz
25 - 1000 MHz
Units
Min
Typ
Max
dB
—
—
0.75
dB
—
—
1.0
Isolation
—
25 - 1000 MHz
dB
20
—
—
Amplitude Balance
—
25 - 1000 MHz
dB
—
—
0.25
Phase Balance
—
25 - 500 MHz
°
—
—
3
500 - 1000 MHz
°
—
—
6
VSWR
Input
Output
25 to 1000MHz
Ratio
—
Ratio
—
—
1.3:1
—
1.4:1
1. All specifications apply with 50 ohm source and load impedance.
This product contains elements protected by United States Patent Number 3,428,920.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.