CSM2-13 Datasheet, PDF (1/3 Pages) Tyco Electronics – Low Cost High IP3 Mixer for PCS/WLL Applications

CSM2-13
Low Cost High IP3 Mixer for
PCS/WLL Applications
Features
• LO & RF 10 TO 2800 MHz
• IF 10 TO 2000 MHz
• LO DRIVE +13 dBm (NOMINAL)
• SURFACE MOUNT
• HIGH INTERCEPT +22 dBm (TYP.)
• +260°C REFLOW COMPATIBLE
Description
The CSM2-13 is a double balanced mixer, designed for use in the
high volume wireless applications. The design utilizes Schottky
ring quad diodes and broadband baluns to attain excellent per-
formance.
Ordering Information
Part Number
CSM2-13
Package
Surface Mount
Product Image
Rev. V3
Electrical Specifications: Z₀ = 50Ω Lo = +13 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -40º to +85ºC
SSB Conversion
fR = 10 to 1200 MHz, fL = 10 to 1200 MHz, fI = 10 to 1000 MHz
dB
7.5
8.0
8.5
Loss(max)
fR = 1200 to 2800 MHz, fL = 1200 to 2800 MHz, fi = 10 to 2000 MHz
dB
9.0
10.0
10.5
SSB Noise Figure
L - R Isolation
(min)
fL = 10 to 1200 MHz
fL = 1200 to 2800 MHz
L - I Isolation (min)
fL = 10 to 2800 MHz
R - I Isolation (min)
fR = 10 to 2800 MHz
1 dB Conversion Comp.
fL = +13 dBm
Input IP3
fL = 10 to 2000 MHz, fI = 10 to 1000 MHz, fR = 10 to 2000 MHz
fL = 2000 to 2800 MHz, fI = 10 to 2000 MHz, fR = 2000 to 2800 MHz
R-Port VSWR
fR = 10 to 2800 MHz
L-Port VSWR
fL =10 to 2000 MHz
fL = 2000 to 2800 MHz
I-Port VSWR
fI = 10 to 2000 MHz
dB
dB
dB
dB
dB
dBm
dBm
dBm
Within 1 dB of conversion loss
35
32
30
30
28
26
25
23
21
21
+10
+22
+20
1.7:1
2.0:1
2.5:1
1.8:1
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.